Butterworth低通滤波器的舰载RLG PINS初始对准精度分析

系泊状态下,用Butterworth低通滤波器解决舰载RLG PINS初始对准中杆臂效应问题时,对准的精度受安装误差、杆臂长度和舰船摇摆等因素的影响。通过仿真分析,认为Butterworth低通滤波器适于解决风浪干扰下的舰载平台系统初始对准中的杆臂效应问题,且安装误差、安装位置是影响对准精度的主要因素,提高系统标定精度,并尽量使系统安装在船体对称面内,可以提高对准精度。     

新算法在划船和伪划船效应中的应用

划船效应补偿是高精度捷联惯导系统解算的重要环节。通过研究其误差特性,推导了新的通用划船效应补偿公式。同时提出了角振动环境中伪划船效应的存在,对伪划船效应的产生原因、表达方式以及对捷联惯导系统的影响进行了分析。对新的补偿算法在划船效应和伪划船效应下进行了仿真试验。     

对目标打击概率的数学模型及分析

通过分析识别跟踪攻击目标的过程,建立了攻击目标打击概率的数学模型和基本算法,通过计算机采用蒙特卡罗法模拟计算了不同条件下对目标的打击概率,以此研究影响打击概率的因素.计算结果表明,武器系统的作战半径和威力半径两个因素对打击概率影响较大,误差因素在一定范围内影响较小,各参数之间存在优化匹配的空间.     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

捷联惯导系统快速自对准误差模型的建立

通过对惯性制导系统两个基本方程的研究,求出了各状态矢量在各坐标系下的微分方程,然后以ψ角法所确立的平台为基准,分别推导得出惯性制导系统各主要状态的微分方程,从而建立了捷联惯性制导系统的误差模型.最后根据静基座捷联惯导系统初始对准的特点对其进行简化,得到了静基座捷联惯导系统快速自对准的误差模型.     

A computation procedure for the exact solution of location-allocation problems with rectangular distances

A method is presented to locate and allocate p new facilities in relation to n existing facilities. Each of the n existing facilities has a requirement flow which must be supplied by the new facilities. Rectangular distances are assumed to exist between all facilities. The algorithm proceeds in two stages. In the first stage a set of all possible optimal new facility locations is determined by a set reduction algorithm. The resultant problem is shown to be equivalent to finding the p-median of a weighted connected graph. In the second stage the optimal locations and allocations are obtained by using a technique for solving the p-median problem.     

改进的蚁群算法及其在卫星网络路由计算中的应用

介绍了蚁群算法的原理,然后对现有蚁群算法进行了一些改进,使它能够快速地收敛以满足高速变化的卫星网络拓扑结构.采用改进的虚拟拓扑策略解决了卫星网络拓扑高速变换的问题,将改进的蚁群算法应用于其上,并给出了相应的性能评估.所提出的改进的虚拟拓扑策略,能够大大减少一个系统周期内卫星网的时间片个数.应用于此基础上的改进的蚁群算法也体现了较好的性能.     

GPS一维弹道修正引信修正算法研究

通过分析基于GPS测量的一维弹道修正引信以及GPS接收机本身数据的特点,提出了一种以GPS测量数据作为初始数据,结合阻尼弹道系数对部分弹道进行解算的实时弹道修正算法,并进行了仿真试验。     

接触触发式测头触发力的理论分析

对用于三坐标测量机及数控机床的接触触发式测头在触测发讯时的触发力进行了理论分析和计算,得出了触发力的大小与其结构参数之间的关系,从而为触发式测头的误差补偿提供了理论基础。     

基于不确定性理论的研制技术风险评估方法研究

分析了装备研制技术风险的含义,根据技术风险的特点建立了评价技术风险的指标体系。在技术风险度量中引入不确定性理论的概念,并建立了基于不确定性的技术风险的度量方法,对综合技术风险进行评价。最后通过实例验证了综合评价方法的可用性。